"2011 New Years Eve Sale"

Hey there,Let's get right to it so you all can carry on with your New Years Eve festivities.Here's what's available this evening:All 3 of these have CPM S30-V blades, and I'm thinking by now most of you know the physical & tech info, so I'll skip it. 0 Standard Plain Model Nebuli SE's with hand rubbed Scotch Brite satin finish.$315.00 each, w/ Pay Pal, and insured USPS Priority Mail Inclusive to USA destinations. !!SOLD!!0 Standard Plain Model...

Read More

"State Of The Nebuli SEs"

Okay then,So you missed out on the first two Nebuli SEs. No worries I'll be finishing up the final processes on the S30-V blades, and more will be rolling out soon.The first handful will likely be plain ones, with an anodized frame or two.More "Fancy" models are in the future as well.K...

Read More

"Moving Right Along With An All Ti Nebuli."

Whoa, another one already? Specs: As with all the Nebulii this one features a Titanium integral frame.This is the 2nd. of  3 that will feature a .125 thick Ti blade.Teflon washers, and a Ceramic detent ball make for smooth blade deployment. All Ti hardware, custom thumb disk,  lock bar stop pin & pivot, this is a fine choice for the Salt Water enthusiast..375 thick, 1.000 wide, and 2.500 long closed, and 3.875 opened.Actual cutting...

Read More

"Alrighty then, Who's Paying Attention Here?"

It's time!!Let's find the Nebuli SE9 a new home.Specs from the Teaser post: This one gets the "9" designation, cuz that's how far I pimped it.As with all the Nebulii this one features a Titanium integral frame.This is the 1st. to feature a .125 thick Ti blade though..I also made up the custom thumb disk as well.The cross hatching is something I had been wanting to employ, and finally got around to doing it.Teflon washers, and a Ceramic detent ball...

Read More

"Custom Gear Shift Knob"

Hello all,Well it's time to part with this one. What we have here is a Custom Gear Shift Knob I recently made.This is the 2nd. of two, and my Father is already sporting the other in his 30 Ford.6061-T6 Aluminum geodesic sphere with .156 thick Copper inlays.Weight is 7 ounces.One facet has been drilled, and tapped, and has a 3/8-16 stainless steel helicoil installed.What, you don't have a Hot Rod to put it in? I suppose it would make a nifty...

Read More

"Merry Christmas"

Hi folks,I finally have found a few spare moments here to wish everyone a very Merry Christmas.Best wishes & tidings to you all,K...

Read More

"Just A Preview....Not Yet Available"

Alright folks,Here's a preview of what I mean by "Special" on the Nebuli SE's.The Nebuli SE 9.  NOT FOR SALE....yet.This one gets the "9" designation, cuz that's how far I pimped it.As with all the Nebulii this one features a Titanium integral frame.This is the 1st. to feature a Ti blade though.I also made up the custom thumb disk as well.The cross hatching is something I had been wanting to employ, and finally got around to doing it.Teflon...

Read More

"Sunday Sale"

Hi all,Let's start off with the bad news.I had planned on having two "Special Nebuli SE's" ready for today, but ran into a few snags.Since my S30-V blades still aren't ready the "Special" thing about these two is that they have Titanium blades.One is fairly basic in appearance, but also includes all Ti hardware, custom made pivot, lock bar stop pin, and thumb disk. The second is just pimped to the hilt.The snag:One is that the Teflon washers I want...

Read More

"Heads Up"

Fair warning kids,Keep your eyes on the Blog this Sunday 12/18 late afternoonish EST for some goodies.Proto Butcherettes?????         orNebuli SE's?????We'll just have to wait, and see....heheheWhatever the case, the items will be offered on a 1st. come 1st. served basis.Thanks for checking in,K...

Read More

"Just got the Blades Back From Heat Treat"

Well,I must say that was a quick turn around from the Heat Treaters.So I suppose it's time to get these moving along.The bad news is that I only have a few hours available on Saturday morning to do anything with them.I honestly wasn't expecting them this soon, and have plans in place for the rest of the weekend.K...

Read More

"Nebuli SE Update"

Hey kids,On Saturday I finished up machining operation #6 of the Nebuli SE blades, which is the final opp.This is where I add the Lock Bar engagement angle.Here's a picture of the fixture I use in this opp.This fixture is also used when milling the outside blade profile from opp. #2.I sent them out today to the Heat Treaters.As soon as they come back, I'll put the finish edges on them, and can start assembling a few:)Let's hope it's soon. They have...

Read More

"Lock Bar Carbidizing"

Hello all,I hope everyone had a wonderful Thanksgiving?Well, I'm at the shop today milling the outside profiles on the new Nebuli blades. While they are cycling, I have 4 1/2 minutes of idle time.I decided to multitask, and carbidize the lock bar faces on the Titanium frames. Carbidizing puts a thin layer of carbide on to the Ti hence making it more wear resistant when the lock bar engages against the hardened S30V knife blade.Here's a quick video of the process.Kenn...

Read More

"A Gift For The Misses....."

or your Mum, Daughter, Sister, Niece, Aunt, Girlfriend, Girlfriends Girlfriend???Hey folks, I just finished these up today in time for Holiday gift giving:)What are they you ask?Well what we have here are my "Titanium Mini Triple Cubes" done up as Earrings.Specs: Grade 2 commercially pure Titanium .450*.450*.450 in size. Featuring hypoallergenic Niobium wires.Here is what I have available, starting in the picture background.1 pair Gold anodized.!!Sold!!0...

Read More

"Translucent Green G-10 Lanterns"

Hi all,So I was walking past the stock rack at the shop the other day, and saw this 1/2" diameter rod of Translucent G-10 sitting there. A light bulb moment occurred, let's make a Self  Lighting Gas Lantern with this stuff.I machined it all up, inserted the vial, then ran to the bathroom with the lights off to check it out. Yep, just as I thought, not only do you get the light from the viewing holes, but the G-10 itself glows as well:) They...

Read More

"Nebuli SE Info"

Okay, since I've been getting a bunch of Emails with all kinds of questions pertaining to the Nebuli SE Knives I figured I'd post some information for you all.Pricing:The Plain, and Solid anodized versions will be $315.00 for USA folks.This will include Pay Pal fees, and insured USPS Priority Mail.Other destinations $330.00, and be forewarned I'm not responsible for the package once I post it.The Fancy ones will run a bit more depending on what features I add to each one.These as well will include Pay Pal fees, and insured USPS Priority Mail.Availability:I...

Read More

"Rocker Lantern"

Hey all,Well I need to get some work done on my truck, so somethings gotta go.Up for your consideration is the "Rocker Lantern" that I had decided to keep for myself.This is one of only three made, and there will not be others.Included with this one is an Atwood Landslide that I have added Glow Dots to.Specs: 2 Titanium end caps .400 x 1.250 x 2.000.Six .250 diameter Lucite rods.One Green .200 dia. x 2.562ish SLGV.Over all assembled length is 3.250.Weighing...

Read More