Money Cube Plus

  • Subscribe to our RSS feed.
  • Twitter
  • StumbleUpon
  • Reddit
  • Facebook
  • Digg

Sunday, 23 September 2012

"Sunday Jibber Jabbering"

Posted on 07:15 by Unknown
Hello,
Just thought I'd take a moment, and give you all an update.
The Cube series has been fun, and there are a bunch out there now in many variations, so it will be some time before any future runs.
Lanterns, well I've produced a ton of these as well, but will sneak some more in as time permits.
I'm going to start the production run of the Titanium Beverage Imbibing Accessory next. I'm hoping 50 to 60 pieces will be enough to sate everyone's desire.
I am still planning a Friction Folder knife, but just haven't had the time to start them yet. Projects with moving pieces, and several parts involved are ones you start, and don't stop until they are done. I'm just waiting for a block of time to open up to get it going.
Lastly, I have my "List" of  JMA ideas with several new things to prototype that have yet to be mentioned.
Thank you all for the support, and kind comments.
Kenn
Read More
Posted in | No comments

Saturday, 22 September 2012

"Tellurium Hextuple Cube Plus"

Posted on 16:35 by Unknown
That's right kids "Tellurium Hextuple Cube Plus", now with 50% more tuple.
Up for sale this evening I have 16 of these.
This is a one time run, and that's it. I've already deleted my programs to resist the temptation to produce more.
They are indeed 50% larger than my normal Cubes measuring 1.350 cubed, and weigh in at 2.8 ounces.
Now due to the size of these, they won't fit in the normal flat rate boxes, so I need to use the medium size ones which of course cost more to ship, and is reflected in the price.
Sale is one per person: 
!!SOLD OUT!!

USA price $80.00.
OCONUS price $125.00.
I ask that you send an Email to jordanmetalart@gmail.com if you'd like to make a purchase, and to confirm availability.
Thanks for dropping by,
Kenn


Read More
Posted in | No comments

Friday, 21 September 2012

"Sign Up Sale With A Twist....""

Posted on 17:06 by Unknown
!!!This SUS has run it's course, and the winners have been announced below!!!

Hello everyone,
So I have these "Prototype Cam Beads" I recently made up, and was going to make them available through a Sign Up Sale.
Well I got to thinking, and wanted to show my appreciation for all the JMA support you've given me. Here's the Twist part, I'm just going to go ahead and give these away to a few lucky folks.
There are 2 made from C147 Copper, and 2 made from Bronze.
They will be pre boxed up, and shuffled around, so it'll be a surprise as to what material you'll receive should you win.
Please read the following text carefully. 
If you're interested in the item offered, I ask the you Email jordanmetalart@gmail.com
In the "Subject" field type "SUS".
I'll respond to Emails in the order received, and reply to each with an entry number.
This is your entry number for the SUS. One entry per person.
Shortly after the close of sign ups, I'll then use a random number generator to choose 4 winners who will each receive 1 "Prototype Cam Bead".
I'll post the winning numbers here on the Blog, and Email the winners requesting their mailing addresses.
Sign up is CLOSED!!
 Out of 76 entrants the winning numbers are...#56, #57, #43, and #12.
Best of luck, and once again thank you all.
Kenn

Read More
Posted in | No comments

Sunday, 16 September 2012

"Damascus Lanterns"

Posted on 17:50 by Unknown
Hello again,
Today for your consideration I have a few Lanterns available.
The material is a Stainless Steel Twist pattern Damascus forged by Chad Nichols.
Physical specs: .384 diameter * 1.348 in length. 
Each Lantern features a 3mm * 23mm Self Lighting Gas Vial, SS split ring, and use a  #8-32 SS socket set screw for captivation of the vial. The set screw has been drilled through for additional viewing of the vial.
After the machining process these are polished up, and then given a dip in Ferric Chloride for etching which brings out the pattern inherent to the material.
This is a one per person sale. 
!!SOLD OUT!!
0 with Green vials.
0 with Ice Blue vials.
USA price on these is $140.00.
OCONUS price $150.00.
I ask that you send an Email to jordanmetalart@gmail.com if you'd like to make a purchase, and to confirm availability.
Thanks so much folks,
Kenn

Read More
Posted in | No comments

Friday, 7 September 2012

"Bead Blasted Tellurium Copper Lanyard Spurs"

Posted on 18:05 by Unknown
Hey Kids,
While it took a bit longer than anticipated, I finally have everything all set on the bead blasted copper spurs.
Physical specs:
Material = Tellurium Copper.
Dimensions = .190 thick by .680 measured over the spur points, with a .201 diameter hole through the center.
For this offering of 24, the finish is bead blasted.
!!!!!!SOLD OUT!!!!!!
USA price is $30.00 for one.
USA price is $55.00 for two.
OCONUS price is $41.00 for one.
OCONUS price is $66.00 for two.
Limit of 2 per person.
Email me at jordanmetalart@gmail.com if you'd like to make a purchase, and to confirm availability.
Thanks folks,
Kenn

Read More
Posted in | No comments

Monday, 3 September 2012

"Lanyard Spurs"

Posted on 14:38 by Unknown
Good day all,
I happened to have some left over Tellurium Copper from the recent run of Hextuple Cubes, and decided to revisit an older item called the "Lanyard Spur".
I ended up changing the original design a bit to make these look more like a boot spur vs. a star which is what I felt the originals resembled.
Physical specs:
Material = Tellurium Copper.
Dimensions = .190 thick by .680 measured over the spur points, with a .201 diameter hole through the center.
For this offering of 24, the finish is plain straight out of the machining center.
!!!!SOLD OUT!!!! I'm going to bead blast the remaining ones, and will offer them in a day or so.
USA price is $30.00 for one.
USA price is $55.00 for two.
OCONUS
price is $41.00 for one.
OCONUS
price is $66.00 for two.
Limit of 2 per person.
Email me at jordanmetalart@gmail.com if you'd like to make a purchase, and to confirm availability.
I thank you kindly for dropping in,
Kenn



Read More
Posted in | No comments
Newer Posts Older Posts Home
Subscribe to: Posts (Atom)

Popular Posts

  • "Nebuli SE Watch"
    Hey there all, I managed to finish up all the remaining blades for the Nebuli SE's this week. I'm headed to the shop in the AM to as...
  • "Nebuli SE Info"
    Okay, since I've been getting a bunch of Emails with all kinds of questions pertaining to the Nebuli SE Knives I figured I'd post so...
  • "Nebuli SE Update"
    Hey kids, On Saturday I finished up machining operation #6 of the Nebuli SE blades, which is the final opp. This is where I add the Lock Bar...
  • "V2 Ti Drive"
    Well hello again, This evening I have a few "Version 2 Ti Drives" available. The last time I made my original "Ti Drives...
  • "The Cube"
    This is "The Cube" made from 1" square aluminum stock and then black hard coat anodized. Is a ball with four square satellite...
  • "TiDrive SUS"
    **This sale has run it's course, with the winners announced below**  Good evening folks, Up for consideration are 2 of my 6AL4V Titanium...

Blog Archive

  • ►  2014 (1)
    • ►  January (1)
  • ►  2013 (41)
    • ►  December (6)
    • ►  November (2)
    • ►  October (7)
    • ►  September (6)
    • ►  August (4)
    • ►  July (2)
    • ►  June (2)
    • ►  May (3)
    • ►  April (3)
    • ►  March (2)
    • ►  February (3)
    • ►  January (1)
  • ▼  2012 (65)
    • ►  December (5)
    • ►  November (6)
    • ►  October (3)
    • ▼  September (6)
      • "Sunday Jibber Jabbering"
      • "Tellurium Hextuple Cube Plus"
      • "Sign Up Sale With A Twist....""
      • "Damascus Lanterns"
      • "Bead Blasted Tellurium Copper Lanyard Spurs"
      • "Lanyard Spurs"
    • ►  August (6)
    • ►  July (7)
    • ►  June (2)
    • ►  May (6)
    • ►  April (3)
    • ►  March (7)
    • ►  February (4)
    • ►  January (10)
  • ►  2011 (55)
    • ►  December (11)
    • ►  November (8)
    • ►  October (4)
    • ►  September (4)
    • ►  August (1)
    • ►  July (2)
    • ►  June (4)
    • ►  May (4)
    • ►  April (4)
    • ►  March (3)
    • ►  February (2)
    • ►  January (8)
  • ►  2010 (41)
    • ►  December (3)
    • ►  November (7)
    • ►  October (4)
    • ►  September (3)
    • ►  August (3)
    • ►  July (4)
    • ►  June (4)
    • ►  May (7)
    • ►  March (3)
    • ►  February (1)
    • ►  January (2)
  • ►  2009 (17)
    • ►  December (2)
    • ►  November (1)
    • ►  October (1)
    • ►  July (1)
    • ►  May (2)
    • ►  April (3)
    • ►  March (7)
Powered by Blogger.

About Me

Unknown
View my complete profile